|
|
|
| Wizard
4000+® Advanced
Digital Weight Indicator |
|
| |
|
| Channels:
|
Up
To 4 |
| Input:
|
mV/V
(Scale) or 4-20mA (Ultrasonic) |
| Power:
|
110
or 240 VAC, 5w |
| Outputs:
|
Up
To 4, 4-20mA |
| Relays:
|
Up
to 4, Solid State or Dry Contact |
| Display:
|
Dual
Line, 16 Characters/Line, Alphanumeric w/ Backlighting |
| Increments:
|
0.1
lb/kg minimum |
| Units:
|
Lbs,
Kgs, Gallons, Liters |
| Keypad:
|
10
Function Keys, 10 Numeric Keys |
| Resolution:
|
Up
to 12,000 counts |
| Enclosure:
|
NEMA 4X (IP67), Structural Foam Molded |
|
 |
CONVERT
FROM EXISTING
HYDRAULIC DIAL |
IT'S
NOT JUST A SCALE, IT'S AN ENTIRE CHEMICAL INVENTORY MANAGEMENT SYSTEM
The Wizard 4000+ is an extremely powerful chemical inventory management
system for monitoring chlorine gas, sodium hypochlorite, hydrofluosilicic
acid and all other chemicals used in water treatment. The Wizard 4000+
helps insure a safe process and a safe plant by providing essential
information such as current chemical feed rate, how much chemical
has been fed, and how much chemical remains. The Wizard 4000+ can
be used with any of our scales and ultrasonic sensors, easily converts
any existing Force Flow hydraulic scale to a digital multi-function
system and can be used with most electronic load cell based weighing
systems.
CHEMICAL
INVENTORY MANAGER
Because the Wizard 4000+ has four separate channels, it can be used
to simultaneously monitor levels in up to four separate tanks. This
means that you can monitor each tank independently as well as get
the combined totals for all the tanks. The "Daily Usage"
data logging function allows for easy record keeping and a "Days
Until Empty" function makes it simple to anticipate tank refilling
and chemical reorder points. Flexible software allows the user to
monitor chemicals in Lbs, Kgs, Gallons, Liters or Percent of Full.
CHEMICAL FLOW METER
A "Feed Rate" function allows the operator to monitor chemical
feed rates, which can be alarmed or transmitted via a 4-20 ma signal.
This important feature allows early warning of dangerously low or
high feed rate conditions and therefore prevents hazardous under or
overdosing of chemicals to your water supply.
LIQUID LEVEL/PUMP CONTROLLER
The Wizard provides up to four set points, each triggering dry or
solid-state relays. These relays can be programmed for high or low
level alarms, automating chemical transfer from bulk to day tanks
or diluting chemicals down from their full strength. These features
prevent the hazards of running out of chemicals or accidental overfilling
of tanks. |
|
|
